GIB® Slim Angle, Arch Bead & GIB® Rondo Corner Beads

The GIB^® Slim Angle is a very popular corner reinforcing trim.

It is a perforated metal 90° or 135° angle and is particularly useful for strengthening external corners but is also available for internal corners. The perforations ensure the jointing compound adheres well and keys into to the bead. These metal beads ensure a straight and knock resistant finished corner line is achieved.

External Corner Beads

GIB Slim Angles (Square perforated holes)

• 90° GIB® Slim Angle – available in 2.4m, 2.7m and 3.0m lengths
• 135° GIB® Slim Angle – available in 2.4m lengths

P01 90° & P01A 135° (Round perforated holes)

• Compound build up reduced in corners due to the low profile nib
• Assists in reducing skirting board and reveal kick out.
• Perforated metal wings angled at 84° enables compound to penetrate through and under the bead
• Available in 2.4m, 2.7m 3.0m and 3.6m lengths

Installation

Internal Corner Beads

PS17 (90°) and PSIA (135°)

• Enables the internal corner to be straightened and neatly finished ready for painting
• Small perforated holes located around the edge reduces the potential for cracking
• Flat raised surface at the centre of the bead 
• Available in 2.4m, 2.7m and 3.0m lengths
• Compound build up reduced in corners due to the low profile nib

Arch Beads

To create a great finish for arches, the arch beads trim curves to form a uniform sharp finish line. The metal trim is perforated on one flange to bond with the jointing compound and the other flange bends to form a uniform radius.

P10 Arch Bead

• Available in 2.4m and 3.0m len